Connecting Ductwork - Amana AMV1154BAW Installation Instructions Manual

B5.
MOUNT THE MICROWAVE OVEN
(cont.)
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4.
Attach the microwave oven to the top cabinet.
5.
Insert 1 self-aligning screws
through top right cabinet holes.
Turn two full turns on each screw.
Right Screw.
6.
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
7.
Install grease filter. See the Owner's Manual
packed with the microwave oven.
Installation Instructions
Filler Block
Equivalent to
Depth of Cabinet
Recess
Self-Aligning Screw
B6.
ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
B7.

CONNECTING DUCTWORK

1.
Extend the house duct down to connect to the
exhaust adaptor.
2.
Seal exhaust duct joints using duct tape.
17
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed.
House Duct