Custom Setup Operation; Setting The Cd Play Mode; Setting The Video Cd Play Mode; Setting The Pause Mode - Alpine PKG-RSE2 Owner's Manual

Custom Setup
Operation

Custom Setup Operation

The following steps (1 through 5) are common to each of the
mode settings. Once the mode is selected under the CUSTOM
SETUP menu, refer to the section for that mode for details.
1
Press DVD SETUP before inserting a disc, or when
in stop mode.
The setup menu appears on the monitor.
2
Press or to select "CUSTOM SETUP," then
press ENTER.
3
Press or to select your desired setting item,
then press ENTER.
CUSTOM SETUP items:
CD PLAY MODE / VCD PLAY MODE / PAUSE MODE /
DOWNMIX MODE
4
Press or to change the setting item, then
press ENTER.
5
Press DVD SETUP.
The settings are stored and the setup mode is deactivated.
• Press RETURN to return to the previous display.
• When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. If the vehicle's
battery is disconnected, the settings will be cleared and will return
to the factory settings.

Setting the CD Play Mode

The unit can be set to play only the audio data on discs containing
music data.
Setting item: CD PLAY MODE
Setting contents: CD-DA / COMPRESSED AUDIO
CD-DA:
• Compressed audio is not supported on this Built-in DVD 10.2 inch
overhead monitor, PKG-RSE2. Please do not change this setting.
Book_PKG-RSE2.indb Book_PKG-RSE2.indb 23 23
Only CD data can be played back.
The initial setting at the factory is
CD DA.

Setting the Video CD Play Mode

When playing a Playback Control (PBC) enabled video CD, you can
choose to set PBC ON or OFF.
Setting item: VCD PLAY MODE
Setting contents: PBC ON / PBC OFF
PBC ON: The PBC menu is displayed.
PBC OFF: The PBC menu is not displayed.
The initial setting at the factory is PBC ON.

Setting the Pause Mode

In pause mode, screen blurring may occur. To overcome this, set
AUTO/FIELD/FRAME accordingly.
Setting item: PAUSE MODE
Setting contents: AUTO / FIELD / FRAME
If you experience blurring during pause mode, set to FIELD or
FRAME.
The initial setting at the factory is AUTO.

Setting the Downmix Mode

This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: STEREO / SURROUND ENCODED
STEREO: Stereo Downmix
SURROUND ENCODED: Surround compatible Downmix
The initial setting at the factory is
SURROUND ENCODED.
23
-EN
4/8/06 4/8/06 2:17:35 AM 2:17:35 AM