Setup Buttons; Transport Control Buttons - Akai XR 20 Reference Manual

SETUP BUTTONS

19. SYSTEM SETUP – Pressing this button calls up various system settings and preferences, such as
MIDI options, note assignments, clocking, as well as display brightness and others. The display
will indicate SYSTEM and SETUP when you are in System Setup. You can move between the
different pages of settings with the PAGE RIGHT / LEFT buttons and change the settings on the
selected page with the VALUE dial or the INC / DEC buttons. To save your settings so they are
recalled the next time you boot up the XR20, press the SAVE button while in this menu and then
press REC to confirm the save. To exit System Setup, press the SYSTEM SETUP button again.
20. RECORD SETUP – Pressing this button calls up various recording settings, such as Quantization,
Swing, Pattern Length, Time Signature, etc. The display will indicate RECORD and SETUP while
you are in Record Setup Mode.
PAGE RIGHT / LEFT buttons and change the settings on the selected page with the VALUE dial
or the INC / DEC buttons. To exit Record Setup, press the Record Setup button again.
21. DRUM SET – This button calls up the Drum Set Mode options, where you can select different
drum/1-shot sounds, synth sounds, change individual pad sounds and modify parameters such as
Volume, Tuning, Panning, etc. The display will indicate DRUM SET while you are in Drum Set
Mode. You can use the PAGE RIGHT / LEFT buttons to move between the different pages of
settings and you can use the VALUE dial or INC / DEC buttons to change the settings on the
selected page. When you modify or customize a Drum Set, you will need to make sure that you
save it (press the SAVE button, then press REC to confirm) in order to be able to access it later.
To exit Drum Set Mode, press the Drum Set button again.
22. EFFECTS – This button calls up the Effects menu, where you can select the effects which are
stored and recalled with every Drum Set. These effects include Reverb, EQ / Compression and
feature ready-to-use presets. To move between the different pages in the Effects Menu, use the
PAGE RIGHT / LEFT buttons. You can use the VALUE dial or INC / DEC buttons to enable and
disable the selected effect or to change the displayed settings.

TRANSPORT CONTROL BUTTONS

23. PLAY – If the XR20 is stopped, pressing PLAY will play the sequence from the current position. If
the XR20 is playing, pressing PLAY will pause the sequence. You can continue playing the
sequence from the position where it was paused by pressing PLAY again. In addition, you may
use the PAGE RIGHT and PAGE LEFT buttons while the unit is playing to advance to the next
Pattern (if one is pending), or start playing from the beginning of the current Pattern (and cancel
any pending Pattern), respectively.
24. STOP – Press this button to stop the current sequence and go back to the start of the Pattern or
Song. Quickly pressing STOP twice sends a MIDI Panic message to the internal voices of the
XR20 and to external devices connected via MIDI. A Panic message effectively stops all sounds
which may be playing. This is useful in situations where a certain sound may be stuck and will not
turn off.
25. REC – Press and hold this button before pressing PLAY to initiate recording. The REC button also
functions as a DO IT command, when prompted for action by the display (for example, when
erasing songs). The REC button LED It will blink when you are required to confirm or cancel an
action.
You can move between the different pages of settings with the
11