Setting The Track Mute With Pads - Akai MPC 2500 Operator's Manual

Music production center
Hide thumbs Also See for MPC 2500:
Table of Contents

Advertisement

Setting the track mute with pads

You can mute/unmute tracks in real time during playback by
hitting the pads. This is useful when you have several instru-
ments assigned to different tracks, so that you can play a
song and switch tracks on/off using the pads while playing
back your sequence.
Pressing the [TRACK MUTE] key brings up the track mute page.
TRACK MUTE Screen
Now field
Like the Now field in the MAIN page, this field
displays the current time position of the sequence.
Sq field
Like the Sq field in the MAIN page, you can select
a sequence in this field.
Track list
The track list is displayed under the Now field and
the Sq field.
The track list displays the first 8 letters of the track
name. The tracks are displayed according to the
position of the pads; Track 1 on the lower left and
track 16 on the upper right. You can display 16 pads
at one time, but you can display 1 to 64 tracks by
switching pad banks. The track whose track mute
is set to off will be highlighted.
Operation
Hitting a pad when the track mute page is dis-
played switches the track mute setting of that track
instead of playing the sound.
Solo function
With the Solo function, you can play back only the selected track.
01. Hit the pad that corresponds to the track that you
wish to play, while pressing the [F6] (SOLO) key.
The [F6] (SOLO) will be highlighted and MPC2500
will play only the selected track while it mutes the
other tracks. You can switch the tracks to play, by
hitting a pad.
02. Pressing the [F6] (SOLO) key deactivates the solo
function.
Setting the track mute in solo mode
Solo function switches the track mute setting tempo-
rary. Turning off the solo function resets the track mute
settings for each track to the same status as before the
solo function was activated. However, you can also turn
off the solo function while keeping the track mute set-
ting unchanged. With this feature, you can make a per-
formance starting with many tracks followed by only
a simple rhythm track and then gradually add tracks.
Operation
When the solo function is on, press the [F6] (SOLO)
key while holding the [SHIFT] key.
The Solo function will be deactivated and the mute set-
ting for the track set to solo will be turned off. The set-
ting for other tracks will be turned on.
MPC2500 Operator's Manual rev 1.0
47

Advertisement

Table of Contents
loading

Table of Contents