ConnectNg To A Pc; SettNg The Usb Mode; TransferrNg FLes To Your Pc - AgfaPhoto Selecta 16 User Manual

AgfaPhoto SELECTA 16 AgfaPhoto SELECTA 16

Connectng to a PC

Use the USB cable and ArcSoft software (CD-ROM) suppled
wth your camera to copy (transfer) pctures to a computer.
Setting the USB mode
Snce the camera's USB port can be set to connect wth
ether a PC or a Prnter, the followng steps wll allow you to
ensure that the camera s correctly configured to connect
wth a PC.
1. Go to the Transmsson menu, then select USB
connecton wth the Up/Down button, and press the
Rght button.
2. Use the Up/Down navgaton buttons to select PC.
3. Press the button to confirm the settng.
70
Transferring files to your PC
The computer wll automatcally detect the camera as a
removable drve. Double-clck the My Computer con on the
desktop to locate the removable drve and to copy folders
and files n the drve to a drectory on your PC as you would
copy any typcal folder or file.
By usng the USB cable, you can transfer the captured
photos and vdeos to a PC. Follow the steps below to
connect the camera to a PC.
1. Start a computer n whch ArcSoft software has been
nstalled.
2. Make sure both the camera and PC are turned on.
3. Connect one end of the suppled USB cable to the USB/
AV OUT port on your camera.
4. Connect the other end of the cable to an avalable USB
port on your PC.