54
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots support PCI (Peripheral Component Interconnect)
cards.
Note: The BIOS setup automatically detects and assigns resources
to the new device (applicable only to Plug-and-Play expansion
cards).
To install an expansion card
Note: The illustrations used in this section show the Altos G310
server chassis.
1
Observe the ESD precautions and pre-installation procedures
described on page 40.
2
Remove the Side panel to access the mainboard. See page 43 for
more information.
3
Locate an empty expansion slot on the mainboard.
4
Remove the tool-less the card bracket lock(1).
4 Configuring the system