To use Batch Capture:
1. Switch on your camcorder and set it to Play
(or VTR / VCR) mode. Refer to your
camcorder's manual for specific instructions.
2. Open a project.
3. In the Capture Step, click the Batch Capture
Tab in the Options Panel. You can also click
the Capture menu arrow and select Batch
Capture.
Note: The videotape automatically plays once you click the
Batch Capture Tab. Rewind or forward you
videotape first to cue it.
4. When you get to the part of the video you
want to record, press [F3]. Then press [F4]
to mark out the task.
5. Continue to play the video, and then repeat
step 4 as needed.
6. Click Play Selected Tasks to view the
selected segments on tape. Click Modify a
task to change a marked segment. You can
also double-click a task and enter a new
timecode.
7. Click Capture Video.
8. Batch capture starts based on all or selected
(if any) tasks. The process stops when the
last task is captured. A report is displayed
for your reference.
Note: It is up to you whether to click Stop before starting
Batch capture. However, if you need to modify some
tasks, click Stop first to help VideoStudio prioritize
capturing tasks.
STORYBOARD 37