Table of Contents
Advertisement
Fast Ethernet Switching System User's Guide
All LEDs are Off
Forget Password If you forget your password, contact D-Link Technical Support at
Troubleshooting
LED is not working properly return the DES-5016. If the DES-
5016 is not powering on while the power cord is plugged into the
wall socket, the power supply is not working. Return the unit.
Check the power plug and verify that the DES-5016 is receiving
adequate power. Log in to the DES-5016 using Local Console
Management, see Chapter 5, Managing the DES-5016, for
instructions.
Power the DES-5016 off and then power it on again. Use the
monitor to check the error messages. Return the DES-5016 to D-
Link for service if the problem persists.
(949) 788-0805 for assistance or check our web site at
www.dlink.com.
80
Advertisement
Table of Contents
