Table of Contents
Advertisement
Fast Ethernet Switching System User's Guide
2. Select the Access Right field and toggle the space bar to select Read Only or Read/
Write.
3. Select the Status field and toggle the space bar to select Valid or Invalid.
4. Select Save and press Enter.
Follow these steps to configure the SNMP Trap Manager Setting:
1. Enter the IP Address of the Trap Manager.
2. Enter the name of the SNMP Community String.
3. Select Status and toggle the space bar to select Valid or Invalid.
4. Select Save and press Enter.
Managing the DES-5016
67
Advertisement
Table of Contents
