Table of Contents
Advertisement
10/100 Auto Negotiation Switch User's Guide
There are heat vents located on the side opposite the fans. The fans and the vents help to cool
the DES-3224. Always leave two inches of space around the DES-3224 so that air can
circulate and cool the DES-3224.
Rear Panel
The three pronged power plug, female RS-232 Console port and rear fan are located at the
rear of the DES-3224, displayed in Figure 3. When installing the DES-3224, leave enough
room to allow you to unplug the power cable if necessary and to attach the RS-232 cable for
Local Console Management.
Figure 3: Rear Panel
Management Methods
The DES-3224 supports three management methods:
Local Console Management
Telnet Management
D-View/ SNMP Management
Local Console Management
Local Console Management is done through the RS-232 Console port. The RS-232 port is
located at the rear of the DES-3224. Managing the DES-3224 in this mode requires a direct
connection between a PC and the DES-3224.
Telnet Management
Telnet is done over the network. Once the DES-3224 is on the network, you can use Telnet to
log in and change the configuration.
D-View/ SNMP Management
The DES-3224 supports SNMP through D-View, D-Link's proprietary SNMP application
and through other vendors' SNMP applications. Please refer to the appropriate
documentation for instructions on installing and using D-View and other SNMP applications.
Introduction
RS-232 Port
Three Prong Power Plug
Fan
4
Advertisement
Table of Contents
