SW-A0441-HSI-002
1. Introduction
1-1. Purpose
This document was written in order to clarify specification for control this product by the host controller.
1-2. Scope
This document would be using by software or hardware engineers for production of this product.
This product is [marantz SR6400/SR5400]. (It's refered to as "This product" after this.)
1-3. Abbreviations
Abbreviation
1-4. References
2. Global Description
2-1. Overview
A Host controller can control or watch out This product as a Slave very easily via the communication cable.
2-2. Block Diagram
HOST
(Controller)
2-3. Interface connecter specification of This Product
Processor Interface
-
UART
-
-
-
GENERAL PORT
-
2-4. Assumptions and Dependencies
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of copyright.
Hardware Software Interface (HSI)
RS232C cable (straight)
Signal name
Connection device
N.C.
TxD (output)
RS232C Level shift driver
RxD (input)
N.C.
GND
N.C.
CTS (input)
RS232C Level shift driver
RTS (output)
N.C.
Marantz America, Inc. 2007
All specifications might be subject to change without notice.
Document Version [1.00b]
Description
(This product)
Connector
D-SUB (9pin, male)
D-Sub Pin
-
1
2
3
-
4
5
6
7
8
-
9
Page: 3 / 17
SLAVE
Connecter
RS232C
D-SUB
(9pin,male)