D-Link DES-1008D User Manual page 13

?? Uplink/ MDI-II (media dependent interface) port for uplink to
another switch, hub or repeater.
?? Store and forward switching scheme capability. As the result of
complete frame checking and error frame filtering, this scheme
prevents error packages from transmitting among segments.
?? NWay Auto-negotiation for any port. This allows for auto-
sensing of speed (10/100Mbps) thereby providing you with
automatic and flexible solutions in your network connections.
?? Flow control for any port. This minimizes dropped packets by
sending out collision signals when the port's receiving buffer is
full. Note that flow control is only available in half duplex
mode.
?? Data forwarding rate per port is at wire-speed for 100Mbps
speed.
?? Data forwarding rate per port is at wire-speed for 10Mbps
speed.
?? Data filtering rate eliminates all error packets, runts, etc., per
port at wire-speed for 100Mbps speed.
?? Data filtering rate eliminates all error packets, runts, etc., per
port at wire-speed for 10Mbps speed.
?? 8K MAC address entries table per device for the DES-1008D.
?? 256 KB RAM buffer per device for the DES-1008D.
?? Network looped detecting.
5