Ac Power Supply Cord Connection; Preparing The Wireless System - Panasonic SC-BTT270 Owner's Manual

STEP 4: AC power supply cord connection
Connect only after all other connections are complete.
A AC power supply cord (supplied)
B To a household AC outlet
Main unit
This unit consumes a small amount of AC power, even when it is turned off.
[BTT770] [BTT370] : approx. 0.05 W*, [BTT270] [BTT273]: approx. 0.4 W*
* When the "Quick Start" setting is "Off"
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BTT770]: approx. 0.2 W
Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.
STEP 5:
Turn on the wireless system after all connections are complete.
Wireless System
VQT3D27
18
Main unit

Preparing the wireless system

[BTT770]
Press [
Unit on/off button [POWER C I, B Í]
C I:
B Í:
POWER
WIRELESS LINK
WIRELESS LINK indicator
Red:
Green : The wireless system is on and the wireless link is activated.
A AC power supply cord (supplied)
B To a household AC outlet
C I, B Í] on the wireless system.
POWER
The wireless system is on.
The wireless system is off.
The wireless system is on and the wireless link is deactivated.
("WIRELESS SPEAKERS LINKED" is also displayed on the main unit's
display by pressing and holding [STATUS] on the remote control.)
[BTT770]
AC IN
Wireless System
≥ AC power supply cord
with a ferrite core is for the
wireless system. Do not
use any other AC power
supply cord except the
supplied one.