Advertisement
*:ll:rrt*{ll*xiA*
1. Quick Erase
While the ERASE button @ is pressed, pressing the Fast
Forward @ or REW @ button activates quick erase.
r.*r*x.'::' 2. Audible yl/arning
.:::,
A warning beep sounds in the following situations:
l. When trying to operate the main unit without a tape
inserted.
2. When the tape comes to the end.
3. When trying to perform quick erase on a tape with the
safety lugs removed.
4. When trying to record on a tape with the safety lugs
removed. (DTl000 only)
When the tape
automatically.
reaches the end, the tape stops
3. Prcvention of Accidental Erasure
I . To avoid accidental erasure, break and rerrove the safery
lug on the Microcassette by pushing it inward with a
ball-point pen or any other hard pointed object.
2. Without the lug, rhe ERASE bunon @ cannot be
activated.
3. If you wish to record on a microcassctte with the
safety lug removed, cover the hole with plastic tape.
4. Care In Handling -_ *",;ffi
l. Avoid exposing the unit, Hand Controller and any other
accessories to direct sunshine, high temperatures, high
humidity or strong magnetic fields.
$1':.r-ll::::1tf$Wffii@
S &, S. Helptut Hints
Ql. The tape does not run.
Al. Is the AC adaptor connected properly?
Is the POWER button pressed ON?
Q2. The unit (or Hand Controller) produces no sound.
42. Check the VOLUME level.
2. To clean the unit, Hand Controller and any other
accessories" do not use solvent such as benzene or
thinner.
Check to see if the Headset is plugged in.
Check whether the Speaker Selector Switch is in
the OFF position or not.
Q3. Sound level is unstable or low.
A'3. The head andlor pinch roller may be dir.ty.
6. taintenance
' !;:::::i+-
insert a pencil into the core of the reel and turn gently
until the slack is removed.
l. Keep the head clean at all times. If necessary, apply
head cleaning solvent with a swab.
2. Excessive tape slack can cause malfunctions. Lightly
SryE::.':?-ry*St'
'
".-fr<€!-!E.qftq{3r-#'_:*_
7. Main Specifications
Thpe: Microcassette
Thpe Speed: 2.4 cm/sec. & 1.2 cm/sec. adjustable -l5go to +30%
Speaker: 57 mm dynamic speaker
Power Source: DC 9V 800mA (AC Adaptor)
Frequency Response: 250-4,0N
Hz at 2.4 cmlsec.
Practical Max. Output: 250 mW (2.4 cm/sec.')
Dimensions & weight: 170 (W) x240 (L) x 78 (H) mm (6.7 x 9.5 x 3.1 in.) 0.8 kg (t.8 lb.)
Advertisement
