Table of Contents
Advertisement
Enter the appropriate values, then click Apply.
Important Note: If encryption of any kind, at any level is applied to the Router, all devices on the network must
comply with all security measures.
Modem Setup
The Modem Setup menu is used to change the Modulation Type used for the ADSL connection. This setting
should only be changed if your service provider has given explicit instructions to change it.
Do not change the (ADSL) Modulation type used unless you have been instructed to do
so. If this setting is not configured properly, the Router will not work.
Note
Figure 3-8. Modem Setup menu (change modulation type)
If you are instructed by your ISP to change the Modulation type is used for your service, select the desired
modulation type and then click Apply. The modulation types available are T1413, G.DMT, GLITE and
MMODE. By default, the Router will automatically detect the modulation used; this setting is listed as MMODE
(Multi-mode).
25
Advertisement
Table of Contents
