Using The Configuration Wizard - D-Link Express Ethernetwork DI-604 Owner's Manual

Using the Configuration Wizard

The DI-604 provides Web based configuration. You can configure your
DI-604 through your Netscape Communicator or Internet Explorer
browser in MS Windows, Macintosh or UNIX based platforms.
Activate your browser. Then type the IP address of the DI-604 into the
Location (for Netscape) or Address (for IE) field and press "Enter." For
example: http://192.168.0.1.
•
Open the web browser
•
Type in the IP Address of
the DI-604
(The IP Address shown in the example above is the default setting. If you have changed the
IP Address of the DI-604 to conform to a network, then input that IP Address in the web
browser, instead of the default IP Address shown.)
•
Type admin in the User Name field
(lower case)
•
Leave the Password blank
•
Click OK
This screen will appear.
Click Run Wizard.
The Setup Wizard screen
will appear. Follow the
Wizard step by step to
quickly configure the
DI-604.
Click Next
http://192.168.0.1
admin