Fader Mode Assign Window; Output Port Att Window - Yamaha DSP5D Editor Owner's Manual

Fader Mode Assign window

In this window of the editor you can freely assign functions to the faders just as in the PM5D's FADER ASSIGN
screen.
Choose [Windows] → [Utility] → [Fader Mode Assign] to access this window. However unlike the FADER ASSIGN
screen on the PM5D itself, you won't be able to execute the assigned function.
If you synchronize Console -> PC, the settings of the console will be reflected in PM5D Editor.
DSP5D Editor does not have a corresponding window.
• CLEAR ALL
Initializes the fader assign settings.
• CLEAR BANK
Initializes the fader assign settings in units of BANKS (A–F).

Output Port Att window

In this window you can specify the attenuator value and switch phase reversal on/off for the output ports of the
PM5D/DSP5D from within the editor.
Choose [Windows] → [System] → [Output Port Att] to access this window.
73 PM5DV2/DSP5D Editor Owner's Manual