Power Failure Resume Function; Operation Mode - Haier HSU-09CRA03-T - annexe 1 Operation Manual

Split type room air conditioner
Hide thumbs Also See for HSU-09CRA03-T - annexe 1:
Table of Contents

Advertisement

Operation
Comfortable SLEEP
Operation
Before going to bed, you can simply press the
SLEEP button and unit will operate in SLEEP
mode and bring you a sound sleep.
Use of SLEEP function
After the unit starts, set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
ON/OFF
TEMP
MODE
FAN
SWING
HEALTH
SLEEP
LOCK

Operation Mode

1. In COOL,DRY mode
1 hours after SLEEP mode starts, temp. will
become 1
C higher than temp. setting. After
O
another 1 hours, temp. rises by 1
The unit will run for further 6 hours then stops.
Temp. is higher than temp. setting so that room
temperature won't be too Iow for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
SET
TIMER
CLOCK
RESET
C further.
O
SLEEP operation stops
Approx.6hrs
Rises 1
O
C
O
C
Unit stop
2. In AUTO mode
The unit operates in corresponding sleep
mode adapted to the automatically selected
operation mode.
3. In FAN mode
It has no SLEEP function.
4.
When quiet sleeping function is set to 8 hours,the quiet
sleeping time can not be adjusted.
When TIMER function is set , the quiet sleeping function
can't be set up .After the sleeping function is set up,
if user resets TIMER function, the sleeping function
will be cancelled; the machine will be in the state of
timing-on,if the two modes are set up at the same time ,
either of their operation time is ended first ,the unit will stop
automatically,and the other mode will be cancelled.

Power Failure Resume Function

If the unit is started for the first time, the
compressor will not start running unless 3
minutes have elapsed. When the power
resumes after power failure, the unit will run
automatically, and 3 minutes later the
compressor starts running.
Note to the power failure resume:
press the sleep button ten times in five seconds
and enter this function after hearing four sounds.
And press the sleep button ten times within five
seconds and leave this function after hearing
two sounds.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hsu-12cra03-t

Table of Contents