Effect Editor Window; Mix Balance Control - Yamaha 02R96 Owner's Manual

7 Effect Editor Window

The Effect Editor window allows you to edit the internal effects processors. To open the
Effect Editor window, choose Effect Editor from the Windows menu.
1
A
Effects processor select
These buttons are used to select the internal effects processors.
B
Effect select section
The EFFECT NAME, TYPE, and IN/OUT are the name, type and I/O configuration of the
effect recalled to the currently selected effects processor. To edit the EFFECT NAME, click
it and type. The LIBRARY button opens the Effects Library window.
C
Meters
These are output meters for the currently selected effects processor.
D
Effect parameter section
This section contains the various effects controls, buttons, and displays. Its layout depends
on the selected effect type.
E

MIX BALANCE control

This control is used to adjust the balance between the wet and dry signals. When set to 0,
only the dry signal is heard. When set to 100, only the wet signal is heard.
F
BYPASS button
This button is used to bypass the currently selected effects processor.
2
4
Effect Editor Window
C
6
5
Studio Manager for 02R96—Owner's Manual
26