Chapter 1 Normal Style; 1-1 Connecting To Your Computer - Pioneer MEP-7000 Control Manual

1

Chapter 1 Normal Style

Under the normal style, both the MEP-7000 Control unit and the MEP-7000 Drive unit
are used.
It is necessary to install the driver software before connecting a MEP-7000 to your
computer. Please do not connect the MEP-7000 to your computer until you have
finished installing the driver software.
For information on how to install the driver software, please refer to
DRIVER PROGRAM" in the Operating Instructions of your MEP-7000.
When 2 or more MEP-7000s are connected
If you connect two or more MEP-7000s to your computer, only the first MEP-7000 will
be able to operate DJS.
1-1
Connecting to your computer
Connect the MEP-7000 to your computer with a USB cable.
For information on each of the cables that come with the MEP-7000 as well as each type of the
MEP-7000's cable plugs, please refer to
instructions.
1
Connect the remote control jack on the back of your MEP-7000's drive
unit to the remote control jack on the back of the MEP-7000's control
unit with the special remote control cable.
2
Connect the PC port on the back of your MEP-7000's drive unit to a
USB port on your computer with a USB cable.
• Although there is also a PC port on the back of the MEP-7000's control unit, the
functions that can be used are different if you connect the MEP-7000 control unit to
your computer.
'Chapter 2 Manipulator Style'
→
3
Turn on the drive unit of your MEP-7000 and then start up your
computer.
• Alternatively, you can also power up your MEP-7000 first and then connect the
MEP-7000 to your computer.
• You can also start up your computer first and then turn on the power to or connect
the MEP-7000.
4
Start up DJS.
• Once DJS starts up, the [DJ Play] screen is displayed.
"CONNECTIONS" in the MEP-7000's operating
Normal Style
For information on the normal style, please refer
to "USING DJ SOFTWARE"
7000's Operating Instructions.
"ABOUT THE
Updating your Version of DJS
In order to use your MEP-7000 in conjunction
with DJS, it is necessary to update DJS to
version 1.600 or later. Please refer to the DJS
User's Manual for directions on how to update
your version of DJS.
'Using the Support Site'
→
Starting up DJS
First connect your MEP-7000 and power it up,
then start up DJS.
Removing the MEP-7000
Always close DJS before you try to remove your
MEP-7000 or turn it OFF.
Warning!
in your MEP-
Warning!
DJS Ver. 1.600
3