Yamaha RX-V471 Easy Setup Manual page 7

3
Confirm that "Save / Exit" is selected, and
then press ENTER.
4
Confirm that "SAVE" is selected, and then
press ENTER.
5
Remove the YPAO microphone from the
unit.
All the settings for the speakers are complete.
• The YPAO microphone is sensitive to heat. Protect the YPAO
microphone from high temperatures (such as from AV
equipment) and direct sunlight.
When "W-1: Out of Phase" appears
Use the following procedure to check the speaker
connections.
Warning messages may appear depending on the types
of speakers or the place where you set them even if they
are connected correctly.
a Press the cursor key to select "Result," and then press
ENTER.
b Confirm that "Wiring" is selected.
c Check the cable connection (+ and -) of the speaker
indicated as red-boxed "Reverse."
If the speakers are connected correctly:
Save the results of the measurement.
Press RETURN, and go to step 3 on the left column.
If the speakers are connected incorrectly:
Turn off the unit and connect the speaker cables again,
and then try YPAO measurement again.
7