Table of Contents
Advertisement
3.3.6
3.3.6
Floppy Configuration
Floppy Configuration
3.3.6 Floppy Configuration
3.3.6
3.3.6
Floppy Configuration
Floppy Configuration
In this section, you may configure the type of your floppy drive.
Advanced
Floppy Configuration
Floppy A
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
3.3.7 Super IO Configuration
3.3.7
3.3.7
Super IO Configuration
Super IO Configuration
Super IO Configuration
3.3.7
3.3.7
Super IO Configuration
Advanced
Configure Super IO Chipset
OnBoard Floppy Controller
Serial Port Address
Infrared Port Address
Parallel Port Address
Parallel Port Mode
EPP Version
ECP Mode DMA Channel
Parallel Port IRQ
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].
3 6
3 6
3 6
3 6
3 6
BIOS SETUP UTILITY
Select the type of
floppy drive
connected to the
[1.44 MB 3 "]
1
2
system.
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
BIOS SETUP UTILITY
Allow BIOS to Enable
or Disable Floppy
Controller.
[Enabled]
[3F8 / IRQ4]
[Disabled]
[378]
[ECP + EPP]
[1.9]
[DMA3]
[IRQ7]
Select Screen
Select Item
+-
Change Option
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
