Remote Control - Yamaha KMA-980 Owner's Manual

■ Names of parts and their functions
1 INPUT
INPUT is not available in default setting.
To activate INPUT, refer to "Input mode" on page 14.
2 KEY CONTROL (
Transpose the key of the played music.
3 MIC (
/ )*
Adjust the overall volume of the microphones.
4 ECHO (
/ )*
Adjust the amount of echo.
5 MUSIC (
/ )*
Adjust the music volume.
* The LED on the corresponding control on the front panel blinks
during adjustment.
6 PRESET (1/2/3)
Recall saved preset settings for MIC volume/ECHO
amount/MUSIC volume/ECHO MODE.
To save current settings of the above, press the desired
button (PRESET 1, 2, 3 or KEY CONTROL on the front
panel) for 3 seconds. Pressing KEY CONTROL saves
settings to PRESET 1. When save is completed, " " on
the KEY CONTROL blinks once. You can save up to 3
presets (PRESET 1/2/3) on this unit. Refer to "Power ON
recall" on page 14.
7 ECHO MODE
Select NORMAL, WIDE or SPACIOUS (KMA-1080
only) echo.

REMOTE CONTROL

/ / )
■ Preparing the remote control
The remote control comes with the battery already
installed. Before using the remote control for the very first
time, pull out the plastic tab, as shown.
For information on replacing the battery, refer to next
section.
■ Operation of remote control
1. Remote control
The distance between the remote control and the remote
sensor of this unit should be within 6 m (20'). Be sure to
aim the remote control directly at the remote sensor on the
front panel.
Continued to the next page.
Plastic tab
Within 6 m
(20')
30°
30°
11
En