Denon AVR-2803 Control Protocol page 7

COMMAND PARAMETER
Z2 PHONO
|
MD/TAPE2
SOURCE
UP
DOWN
**
ON
OFF
SR PHONO
|
CDR/TAPE1
SOURCE
SV DVD
VDP
TV
DBS/SAT
VCR-1
VCR-2
VCR-3
V.AUX
SOURCE
SD AUTO
PCM
DTS
RF
ANALOG
EXT.IN-1
EXT.IN-2
Z2 COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)
function
MULTI ZONE-2 mode set , and select source
---The name of PARAMETER is
the same as that of the time of SI COMMAND.
MULTI ZONE-2 mode cancel
MULTI ZONE-2 VOLUME UP/DOWN , direct change to ***dB Z2UP<CR>
**:00 to 99 by ASCII , 80=0dB
MULTI ZONE-2 ON/OFF change
---Invalid at AVR-2803
REC SELECT mode set , and select source
---The name of PARAMETER is
the same as that of the time of SI COMMAND.
REC SELECT mode cancel
VIDEO SELECT mode set , and select source
---Invalid at AVR-2803
VIDEO SELECT mode cancel
set DIGITAL INPUT AUTO mode
set DIGITAL INPUT force PCM mode
set DIGITAL INPUT force DTS mode
---Invalid at AVR-2803
set force ANALOG INPUT mode
set EXT.IN-1 mode ---Set EXT.IN mode at AVR-2803
set EXT.IN-2 mode ---Invalid at AVR-2803
- 7 -
example
Z2PHONO<CR>
|
Z2MD/TAPE2<CR>
Z2SOURCE<CR>
Z2DOWN<CR>
Z280<CR>
Z2ON<CR>
Z2OFF<CR>
SRPHONO<CR>
|
SRCDR/TAPE1<CR>
SRSOURCE<CR>
SVDVD<CR>
SVVDP<CR>
SVTV<CR>
SVDBS/SAT<CR>
SVVCR-1<CR>
SVVCR-2<CR>
SVVCR-3<CR>
SVV.AUX<CR>
SVSOURCE<CR>
SDAUTO<CR>
SDPCM<CR>
SDDTS<CR>
SDRF<CR>
SDANALOG<CR>
SDEXT.IN-1<CR>
SDEXT.IN-2<CR>
*