Advertisement
ON/OFF
MODE
SPEED
TEMP/TIME
Timer On or Timer Off mode is used to pre-start or shut off your unit in advance.
program this up to 24 hours in advance. You can use the Timer in 4 functions, i.e
ENERGY SAVER, DEHUMID or FAN.
Timer on (See Fig.#5)
The unit must be on to set the timer. Unit will shut down automatically after it
settings in 5 seconds. Use this mode to pre-set the start time of the unit 24 hou
a) Press TIMER ON. LCD display will show "XX" (time set last time). When power i
for the first time, LCD display will show "01".
b) Set the desired number of hours by pressing the ( ) pad of the Temp/Time butt
for each hour. If you passed the desired time, use the ( ) pad key to lower the
c) After you set TIMER ON, LCD display will show the time. This time displayed me
the unit will starts after X hours.
Timer off ( See Fig. #5)
The unit must be running to set time off. Use this to preset the time you would l
unit ot shut off.
a) Press TIMER OFF. LCD display will show "XX" (time set last time).When power is
for the first time, LCD display will show "01".
b) Set desired number by pressing the ( ) pad of the Temp/Time buttons, once for
hour. If you pass the desired time, use the ( ) pad key to lower the selection.
c) After you set TIMER OFF, LCD display will show the room temperature about 5 sec
later.
When using the timer, the unit will revert to the last COOL and FAN settings when
The timer must be reset every time you choose to use it.
TIMER
11
Advertisement
