Harman Kardon DVD 37 Connecting Manual

To Y (green)/
Pb (blue)/
To HDMI
Pr (red)
or DVI
component
port on TV
video
connectors
é ∂
Connecting to a TV Only
When using the DVD 37 with a television but no audio receiver or processor, connect it as follows. Make the Analog Audio
Connection å and one of the Video Connections (Composite Video ∫, S-Video ç, Component Video ∂).
If your television or video display is HDMI-capable, you only need to make the HDMI é connection, as it handles both audio and video.
Remember to plug in the power cord.
IMPORTANT NOTE: Make certain that any device being connected, including the DVD 37, your receiver or processor and your TV or
video display, is turned off whenever you make connections between products.
DVD 37 CONNECTION GUIDE 1
TV
To video
input
To S-video
connectors
input
(yellow)
connectors
on the TV
on the TV
ç ∫
To analog audio
input connectors
(red/white) on the TV
å
To power outlet
(AC 120V/60Hz)
AC INPUT
120V~, 60Hz
13W