Frigidaire FRA106CV1 Installation Instructions

Compact window mounting (10,000-12,000 btu)

Hide thumbs Also See for FRA106CV1:

Download this manual See also: Use and Care Manual

Compact Window Mounting (10,000~12,000 BTU)

The unit is for window mounting only.

Carefully read the installation manual before beginning.

Pay attention to danger and safety notices.

be exposed:

Carefully inspect location where air conditioner will be inst

period of time.

Handle air conditioner with care.

NOTE:

the best way to store unit during winter, or when not

in use.

The top rail on your unit may already be installed. If not,

follow the steps below.

Top Rail Hardware

Before installing, the top rail must be assembled on the unit.

Top Rail

Installation Instructions

READ BEFORE INSTALLING UNIT

INSTALLATION WARNINGS AND CAUTION

Top Rail

Qty.

Drill (If pilot holes are needed)

Mounting Hardware

( or Wooden windows)

weather seals

window sash seal foam

Qty.

Page 1: Installation Instructions
( or Wooden windows) in use. weather seals The top rail on your unit may already be installed. If not, window sash seal foam follow the steps below. Qty.
Page 2: How To Install
Place unit on floor, a bench or a table. There is a Left and Right side Filler Panels - be sure to use the proper panel for each side. When installed, the flange for securing the panel in place to the window sill will be facing into the room.
Page 3 Installation Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail of the unit.
Page 4 Installation NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself. Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 11).

Fra122cv1 Fra123cv1