Parts And Components; Using 3D Glasses - Samsung SSG2100AB User Manual

3D Active Glasses
SSEi-aICCRS
• User's Guide
•
Product Overview
The SSG-2100AB is a device that enables you to view 3D images.
Samsung 3D Active Glasses must be used with Samsung 3D TV to enjoy 3D.
Parts and Components
LED Indicator
Button Battery
(CR2025)
User's Guide
Using 3D Glasses
• On
• Motion Range
.00
Red LED Blinks
three times.
~ Signal range depends on kinds
&
size of TV and viewing angle.
-
-
,Open the cover
• Replacing the Batteries (Lithium/manganese Battery, CR2025)
Red LED Blinks every three seconds continually, replace the Batteries with new ones.
, ( ( r
• Rules for TV Watching
If you are watching 3D in a room lit by a light magnetic fluorescent lamp (50Hz or
60Hz), you may see flickering on the 3D Glasses. If this occurs, please tum off the light.
If you change the channel or input mode when watching 3D, the TV will change to
2D from 3D automatically. When the TV changes from 3D to 2D the glasses will
automatically tum off.
*
3D glasses may not work properly for a few seconds at this time.
If the Emitter becomes disconnected due to either a change in the angle or viewing
distance, the 3D glasses tum off automatically after 2 minutes. In this case, Red LED
Blinks three times.
*
3D glasses may not work properly due to noise interference from other electric devices under
specific conditions.
3D Active Glasses
SSEi-aICCRS
• User's Guide
•
Product Overview
The SSG-2100AB is a device that enables you to view 3D images.
Samsung 3D Active Glasses must be used with Samsung 3D TV to enjoy 3D.
Parts and Components
LED Indicator
Button Battery
(CR2025)
User's Guide
Using 3D Glasses
• On
• Motion Range
.00
Red LED Blinks
three times.
~ Signal range depends on kinds
&
size of TV and viewing angle.
-
-
,Open the cover
• Replacing the Batteries (Lithium/manganese Battery, CR2025)
Red LED Blinks every three seconds continually, replace the Batteries with new ones.
, ( ( r
• Rules for TV Watching
If you are watching 3D in a room lit by a light magnetic fluorescent lamp (50Hz or
60Hz), you may see flickering on the 3D Glasses. If this occurs, please tum off the light.
If you change the channel or input mode when watching 3D, the TV will change to
2D from 3D automatically. When the TV changes from 3D to 2D the glasses will
automatically tum off.
*
3D glasses may not work properly for a few seconds at this time.
If the Emitter becomes disconnected due to either a change in the angle or viewing
distance, the 3D glasses tum off automatically after 2 minutes. In this case, Red LED
Blinks three times.
*
3D glasses may not work properly due to noise interference from other electric devices under
specific conditions.