Pairing For The First Time; Charging The Battery; How To Pair Again; Viewing Guidelines - Samsung SSG-3300CR User Manual

~ A wireless battery charger can be purchased in some regions. For details on the
wireless battery charger, visit www.samsung.com.
+Charging the Battery
If the red LED blinks every 2 seconds, charge the battery as shown belew. The orange LED
will blink every second when battery charging is in progress. The green LED will blink every 2
seconds when the charging is finished.
• Viewing guidelines
• When viewing 30 video under a fluorescent lamp (50Hz - 60Hz) or
3-wavelength lamp, you may notice a small amount of screen flickering.
' * '
If so, dim the light or turn the lamp off.
• Switching the input mode while watching a 3D movie may disable the 3D
function on the TV. As a result, the 3D glasses may not function and the
movie may not be displayed properly.
• If the 3D glasses move outside of the recommended operating distance, the
signal from the TV will be disconnected and the display of the 3D glasses will
turn off after several seconds. The 3D glasses will automatically power off about
3 minutes after the display turns off. When this happens, the red LED will turn on
for 3 seconds.
' * '
Under some circumstances, the 3D glasses may malfunction due to
interference from other devices.
[~Jl
SAMSUNG TV
[J
. .
r .
~,
PC
~NOleBoOk
USB
~
U581
rn
"
....
Micro
USB
Cable
~.
USB PORT
+Pairing for the first time
1. Turn on the TV.
2. Press the pairing button on the 30 glasses shortly. The 30 glasses will power on
and pairing will start.
3. The message "30 glasses are connected" will be displayed on the TV screen when
the pairing is successfully completed.
4. Enjoy 30 video after configuring the 3D function settings on the TV.
~
After the first pairing, putting on the 3D glasses will automatically power on
the glasses. To power off, take off the glasses.
~
If the pairing failed, the 3D glasses will power off.
~
If the first attempt to pair fails, power the monitor off and on again and
perform step 2.
+ How to pair again:
Press the pairing button on the 3D glasses for more
than 2 seconds.
<Pairing is needed again in the following occasions>
- Pairing may be needed again after the 3D TV is repaired.
- You want to view a 3D video on a new Samsung 3D TV released in 2011 .
I
Engllsh-2