Table of Contents
Advertisement
Taking pictures with your Digital Video Camera is a snap. Just point and shoot!
●Step 1 Make sure the Digital Video Camera is turned on.
●Step 2 Use the LCD display to frame the subjects you want to photograph.
●Step 3 Press the Shutter button to take a picture.
The LCD will turn off until it is stored in the memory. When the LCD Display resume, you
may focus your next target to take the next picture.
To take close-up pictures
●Step 1 Push the Macro switch downwards to select Macro mode .
The Macro indicator
take pictures at a closer range (between 25~30cm).
●Step 2 To take pictures, follow the steps in the "Shooting Photos"
section.
To take portrait and distant pictures
●Step 1 Push the Macro switch upward. This sets the Digital Video Camera to normal mode,
and the icon
on the LCD panel will disappear, allowing you to take pictures of people or
sceneries which distance 1.2m~infinity.
●Step 2 To take pictures,follow the steps in the "Shooting Photos "section.
Digital Zoom
The Zoom Lever hides normally, press
framed image can be zoomed between 1.0X ~4.0X.
Snapshot Menu
In Capture mode, press Menu button to enter Snapshot Menu:
White Balance Setting
●Step 1 Use
to select WB on the menu bar.
on the LCD display will show , allowing you to
to enter Zoom in / Zoom out functions, the
-16-
English
Advertisement
Table of Contents
