Floppy Configuration; Super Io Configuration - ASROCK X48TURBOTWINS User Manual

3.3.6

3.3.6 Floppy Configuration

3.3.6 Floppy Configuration Floppy Configuration Floppy Configuration
3.3.6 3.3.6 Floppy Configuration
In this section, you may configure the type of your floppy drive.
BIOS SETUP UTILITY
Advanced
Floppy Configuration
[1.44 MB 3 "]
Floppy A
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
3.3.7 3.3.7

3.3.7 Super IO Configuration

3.3.7 3.3.7 Super IO Configuration Super IO Configuration Super IO Configuration Super IO Configuration
BIOS SETUP UTILITY
Advanced
Configure Super IO Chipset
OnBoard Floppy Controller [Enabled]
Serial Port Address [3F8 / IRQ4]
Infrared Port Address [Disabled]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OnBoard Floppy Controller
Use this item to enable or disable floppy drive controller.
Serial Port Address
Use this item to set the address for the onboard serial port or disable it.
Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],
[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.
Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3]. If you plan to
use ASRock DeskExpress on this motherboard, please keep this item on
[Disabled] option.
Select the type of
floppy drive
connected to the
1
2
system.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Allow BIOS to Enable
or Disable Floppy
Controller.
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
6 5 6 5 6 5
6 5 6 5