Installation - ASROCK X48TURBOTWINS User Manual

2 . 1 4 2 . 1 4 Serial A 2 . 1 4 Serial AT T T T T A (SA Serial A Serial A A (SA A (SA A (SAT T T T T A) / Serial A
2 . 1 4 2 . 1 4 Serial A A (SA

Installation

Installation Installation Installation Installation
This motherboard adopts Intel
(SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID 5,
and Intel Matrix Storage) functions. You may install SATA / SATAII hard disks on this
motherboard for internal storage devices. This section will guide you to install the
SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage
function, you need to install at least 2 SATA / SATAII hard disks. If you
plan to use RAID 5 function, you need to install at least 3 SATA / SATAII
hard disks.
2. It is not recommended to switch the "Configure SATAII as" setting
between AHCI, RAID and IDE mode after OS installation.
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A AII (SAT T T T T AII) Hard Disks AII (SA AII (SA
A) / Serial A AII (SA
ICH9R south bridge chipset that supports Serial ATA
®
3 9 3 9 3 9
3 9 3 9
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks