Ide Configuration - ASROCK WOLFDALE1333-GLAN-M - V1.0 User Manual

3.3.4 3.3.4

IDE Configuration

IDE Configuration
3.3.4 IDE Configuration 3.3.4 3.3.4 IDE Configuration IDE Configuration
Advanced
IDE Configuration
ATA/IDE Configuration
SATAII 1
SATAII 2
SATAII 3
SATAII 4
IDE1 Master
IDE1 Slave
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA
1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA
3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE
1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,
SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
Master
Slave
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction.
3 4 3 4 3 4
3 4 3 4
BIOS SETUP UTILITY
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
[Enhanced]
device is used.
Set [Enhanced]
[Hard Disk]
when Native OS
[Not Detected]
(Win2000 / XP)
[Not Detected]
is used.
[Not Detected]
[ATAPI CDROM]
[Not Detected]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
ICH7 south bridge only supports four IDE devices
®
[SATA 1, SATA 2, [SATA 1, SATA 3,
SATA 3, SATA 4] IDE 1]
SATAII 1, SATAII 2 SATAII 1
SATAII 3, SATAII 4 SATAII 3
[IDE 1, SATA 2,
SATA 4]
SATAII 2
SATAII 4