Ide Configuration - ASROCK WOLFDALE1333-D667 - V2.3 User Manual

3.3.4 3.3.4

IDE Configuration

IDE Configuration
3.3.4 IDE Configuration 3.3.4 3.3.4 IDE Configuration IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
[Enhanced]
ATA/IDE Configuration
SATAII 1
[Hard Disk]
SATAII 2
[Not Detected]
SATAII 3
[Not Detected]
SATAII 4
[Not Detected]
IDE1 Master [ATAPI CDROM]
IDE1 Slave
[Not Detected]
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows NT). If
native OS (Windows 2000 / XP) is installed, please select [Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA
1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA
3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE
1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2,
SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4]
when the installed device is used with legacy OS.
[SATA 1, SATA 2,
SATA 3, SATA 4]
Master SATAII 1, SATAII 2
Slave SATAII 3, SATAII 4
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction.
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
device is used.
Set [Enhanced]
when Native OS
(Win2000 / XP)
is used.
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
ICH7 south bridge only supports four IDE devices
®
[SATA 1, SATA 3,
IDE 1]
SATAII 1
SATAII 3
[IDE 1, SATA 2,
SATA 4]
SATAII 2
SATAII 4
3 3 3 3 3 3
3 3 3 3