Table of Contents
Advertisement
Resource Configuration:
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
F1:Help
Esc:Previous Menu
PCI Latency Timer (PCI Clocks): The default is 32. It is recommended to keep
the default value unless the inserted PCI expansion cards' specifications
require other settings.
Primary Graphics Adapter: This allows you to select [AGP] or [PCI] as the
primary graphics adapter.
Peripheral Configuration:
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard PATA-IDE
OnBoard LAN
OnBoard AC' 97 Audio
F1:Help
Esc:Previous Menu
OnBoard FDC: Use this to enable or disable floppy drive controller.
OnBoard Serial Port: Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
2 8
2 8
2 8
2 8
2 8
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Resource Configuration
:Select Item
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
Peripheral Configuration
:Select Item
32
PCI
+/-:Change Values
Enter:Select
Sub-Menu
Auto
Auto
Disabled
Auto
ECP + EPP
1.9
Auto
Auto
Disabled
5
200h
Enabled
Enabled
Auto
+/-:Change Values
Enter:Select
Sub-Menu
[ Setup Help ]
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
F9:Setup Defaults
F10:Save & Exit
[ Setup Help ]
<Enter> to enable or
disable the floppy
drive controller.
F9:Setup Defaults
F10:Save & Exit
Advertisement
Table of Contents
