Installing An Expansion Card; Expansion Slots (Pci, Amr And Pci Express Slots) - ASROCK P4VM890 Installation Manual

Hide thumbs Also See for P4VM890:

Table of Contents

Available languages

There are 3 PCI slots, 1 AMR slot, and 1 PCI Express slot on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI

interface.

AMR slot: The AMR slot is used to insert an ASRock MR card with v.92 Modem

functionality.

PCIE Slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane

width graphics cards.

Installing an expansion card

Step 1.

Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2.

Remove the system unit cover (if your motherboard is already installed in a

chassis).

Step 3.

Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 4.

Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5.

Fasten the card to the chassis with screws.

Step 6.

Replace the system cover.

ASRock P4VM890 Motherboard

1 1

Table of Contents