Table of Contents
Advertisement
Appendix: Advanced BIOS Setup
This section will introduce you the following BIOS Setup menus: "Advanced,"
"Security," "Power," "Boot," and "Exit."
1. Advanced BIOS Setup Menu
Advanced
Main
Spread Spectrum
CPU Host Frequency
Actual Frequency
CPU Ratio Selection
DRAM Frequency
Hyper Threading Technology
Chipset Configuration
Resource
Configuration
Peripheral
Configuration
System Hardware Monitor
F1:Help
Esc:Exit
Spread Spectrum: This field should always set to [Disabled] for better system
stability.
CPU Host Frequency: This shows current CPU host frequency of the installed
motherboard.
CPU Ratio Selection: CPU Ratio is the multiple that times the frontside bus
frequency will equal the core speed of the installed processor. Whether the
option is open or locked is determined by the installed processor.
DRAM Frequency: If [Auto] is selected, the motherboard will detect the memory
module(s) inserted and assigns appropriate frequency automatically. You can
also select other value as operating frequency: [100MHz <DDR200>],
[133MHz <DDR266>], [166MHz <DDR333>], [200MHz <DDR400>].
Hyper-Threading Technology: To enable this feature, it requires a computer
system with an Intel Pentium
technology and an operating system that includes optimization for this technology,
such as Microsoft
XP, or Linux kernel version 2.4.18 or higher. This option will be hidden if the
current CPU does not support Hyper-Threading technology.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Security
Power
Disabled
Auto
133MHz
Locked
Auto
Enabled
:Select Item
+/-:Change Values
:Select Menu
Enter:Select
®
4 processor that supports Hyper-Threading
®
®
Windows
XP. Set to [Auto] if using Microsoft
Exit
Boot
[
<Enter> to enable or
disable the feature of
spread spectrum.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu
Setup Help
]
®
Windows
®
Advertisement
Table of Contents
