ASROCK P45TS - V1.0 User Manual page 31

1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (Port5); see p.11/12 No.15) and the
eSATAII connector (eSATAII_TOP; see p.11 No.39 or p.12 No.38) with a SATA
data cable first.
Connect the SATA data
cable to the orange
SATAII connector
(SATAII_6 (Port5))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port
of the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII device
cable to eSATAII port of the I/O shield
3 1 3 1 3 1
3 1 3 1