Chipset Configuration - ASROCK P45R2000 User Manual

3 . 3 . 2 Chipset Configuration

3 . 3 . 2 3 . 3 . 2 Chipset Configuration Chipset Configuration Chipset Configuration
3 . 3 . 2 3 . 3 . 2 Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
Memory Remap Feature
DRAM Frequency
Flexibility Option
Standard Memory Info : 4-15-5-5-5-26-3-3-3
DRAM tCL
DRAM tRAS
DRAM tRP
DRAM tRCD
DRAM tWR
DRAM tRFC
DRAM tWTR
DRAM tRRD
DRAM tRTP
Advanced Memory Info : 18-18-9-9-0-0
DRAM CH0 RCOMP ODT
DRAM CH1 RCOMP ODT
DRAM CH0 tRD
DRAM CH1 tRD
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration
options: [Enabled] and [Disabled]. The default value is [Disabled].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)] for
DDR2 memory modules, or select [533MHz (DDR3 1066)] or [667MHz (DDR3
1333)] for DDR3 memory modules. The configuration options depend on the
CPU and memory module you adopt on this motherboard. Please refer to page
9 for the CPU FSB frequency and its corresponding memory support frequency.
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Standard Memory Info : 4-15-5-5-5-26-3-3-3
DRAM tCL
Use this item to adjust the means of memory accessing. Configuration
options for DDR2 memory modules are [3], [4], [5], [6], [7] and [Auto].
Configuration options for DDR3 memory modules are are [5], [6], [7], [8], [9],
[10] and [Auto].
DRAM tRAS
This controls the number of DRAM clocks for TRAS. Configuration options:
Configuration options: [Auto], [9] to [24].
DRAM tRP
This controls the number of DRAM clocks for TRP. Configuration options:
Configuration options: [Auto], [3] to [10].
ENABLE: Allow
[Disabled]
remapping of
[Auto]
overlapped PCI memory
[Disabled]
above the total
physical memory.
[Auto]
[Auto]
DISABLE: Do not allow
[Auto]
remapping of memory.
[Auto]
[Auto]
Select Screen
[Auto]
Select Item
[Auto]
[Auto] + - Change Option
F1 General Help
[Auto]
F9 Load Defaults
F10 Save and Exit
[Auto]
[Auto] ESC Exit
[Auto]
[Auto]
6 0 6 0 6 0
6 0 6 0