Storage Configuration - ASROCK P45DE3 - V1.0 User Manual

EUP Support
Use this item to enable or disable EuP. The default value is [Auto].
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3.4.4

3.4.4 Storage Configuration

3.4.4 Storage Configuration Storage Configuration Storage Configuration
3.4.4 3.4.4 Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
SATAII Configuration
Configure SATAII as
OnBoard IDE Controller [Enabled]
SATAII 1
SATAII 2
SATAII 3
SATAII 4
SATAII 5
SATAII 6
IDE1 Master
IDE1 Slave
AHCI CD/DVD Boot Time out
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATAII Configuration
Please select [Compatible] when you install legacy OS. If native OS
(Windows 2000 / XP / Vista
®
Then in the option "Configure SATAII as", you are allowed to set the selec-
tion to [IDE] or [AHCI]. The default value is [IDE].
If you select [AHCI] mode, the options "Hot Plug" and "SATA Link Power
Management" will appear. Configuration options: [Enabled] and [Disabled].
The default value is [Enabled].
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
OnBoard IDE Controller
Use this item to enable or disable onboard IDE controller. The default value
is [Enabled].
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction.
Vista certification.
® TM
Options
Disabled
[Enhanced]
Compatible
[IDE]
Enhanced
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
F1 F1 General Help General Help
[35]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
) is installed, please select [Enhanced].
TM
5 1 5 1 5 1
5 1 5 1