Oc Tweaker Screen - ASROCK P45DE3 - V1.0 User Manual

3.3 OC T 3.3 3.3 OC T OC T OC Tweak weak weaker Screen weak er Screen er Screen er Screen
3.3 3.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load CPU EZ OC Setting
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Strap FSB to MCH
Boot Failure Guard
Spread Spectrum
Ratio Actual Value
Ratio CMOS Setting
DRAM Frequency
DRAM Command Rate
DRAM Timing Configuration
DRAM RCOMP and tRD Configuration
DRAM DLL SKEW Configuration
Voltage Configuration
ASRock VDrop Control
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load CPU EZ OC Setting
You can use this option to load CPU EZ overclocking setting. Configuration
options: [CPU 3.00GHz], [CPU 3.20GHz], [CPU 3.40GHz], [CPU 3.60GHz],
[CPU 3.80GHz], [CPU 4.00GHz], [CPU 4.20GHz] and [CPU 4.40GHz]. Please
note that overclocing may cause damage to your CPU and motherboard. It
should be done at your own risk and expense.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual],
[I.O.T.] and [Optimized]. The default value is [Auto]. If you select [Manual],
Untied Overclocking function is enabled. Please refer to page 33 for the
details of Untied Overclocking Technology. Therefore, you are allowed to
adjust the Host frequency and PCIE frequency in the following two items.
If you select [I.O.T.] (Intelligent Overclocking Technology), the system will
automatically enable the overclocking function when your CPU is heavy
loaded.
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Strap FSB to MCH
Use this item to strap FSB to MCH. Configuration options: [Auto], [800],
[1066], [1333] and [1600].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This item should always be [Auto] for better system stability.
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
motherboard.
[Auto]
It should be done at
[133]
your own risk and
[100]
expense.
[Auto]
[Enabled]
[Auto]
[8]
[9]
Select Screen
[Auto]
Select Item
[Auto]
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
[With VDrop]
3 6 3 6 3 6
3 6 3 6
Exit