Chipset Configuration - ASROCK K8UPGRADE-760GX User Manual

TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [2CLK], [3CLK],
[4CLK], [5CLK], and [6CLK].
TRAS
Use this to adjust TRAS values. Configuration options: [Auto], [5CLK], [6CLK],
[7CLK], [8CLK], [9CLK], [10CLK], [11CLK], and [12CLK].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK],
[4CLK], [5CLK], and [6CLK].
MA Timing
Use this to adjust values for MA timing. Configuration options: [2T], [1T]. The
default value is [2T].

3.3.2 Chipset Configuration

Advanced
Chipset Settings
OnBoard AC97 Audio
OnBoard LAN
AGP Aperture Size
AGP Data Rate
AGP Fast Write
Primary Graphics Adapter
HT Width
HT Speed
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
OnBoard AC97 Audio
Select [Auto] or [Disabled] for the onboard AC97 Audio feature.
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card's specifications requires other sizes.
AGP Data Rate
For an AGP 3.0 card, you may set AGP Data Rate between [8X] or [4X], and
the default value is [8X]. For an AGP 2.0 card, you may set AGP Data Rate
among [4X], [2X], and [1X], and the default value is [4X].
AGP Fast Write
Use this item to enable or disable the feature of AGP fast write protocol
support.
BIOS SETUP UTILITY
[Auto]
[Enabled]
[64 MB]
[8X]
[Disabled]
[PCI]
[Auto]
[Auto]
Enable/Disable onboard
Audio device.
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit