ASROCK K7VM4 User Manual page 23

Chipset Configuration:
Advanced
Chipset Configuration
AGP Mode
AGP Aperture Size
AGP Fast Write
Onboard VGA Share Memory
PCI Delay Transaction
USB Controller
USB Device Legacy Support
DRAM CAS# Latency
Over Vcore Voltage
F1:Help
Esc:Previous Menu
AGP Mode: When an 8X-AGP card is installed on K7VM4 motherboard for your
PC system, this feature will be set to [Auto] automatically. If the installed
AGP card is not an 8X-AGP card, then it will be set to [4X] as the default
value.
AGP Aperture Size: It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card's specifications requires other
sizes.
AGP Fast Write: This allows you to enable or disable the feature of AGP fast
write protocol support.
OnBoard VGA Share Memory: This allows you to select the size of share
memory for onboard VGA. Onboard VGA will get better resolution if larger
size of share memory is selected. Please do not select [None] if AGP or PCI
graphics card is not inserted.
PCI Delay Transaction: Enable PCI Delay Transaction feature will free the PCI
Bus when the CPU is accessing 8-bit ISA cards. Disable this feature when
using ISA cards that are not PCI 2.1 compliant.
USB Controller: Use this to enable or disable the use of USB controller.
USB Device Legacy Support: Use this to enable or disable the support to
emulate legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS# Latency: This is used to adjust the means of memory accessing.
Configuration options: [3], [2.5], [2], [Auto].
Over Vcore Voltage: Enable this item will increase the CPU Vcore voltage
around +5%. The default value is [Disabled].
It is not recommended to enable "Over Vcore Voltage" feature.
Doing so may cause CPU damage.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Auto
128MB
Disabled
Auto
Disabled
Enabled
Disabled
Auto
Disabled
:Select Item
+/-:Change Values
Enter:Select
[ Setup Help ]
<Enter> to select AGP
Mode.
F9:Setup Defaults
F10:Save & Exit
Sub-Menu