ASROCK K7VM2 User Manual page 12

Primary IDE connector (Blue)
(39-pin IDE1)
(see p.6 item 7)
IDE1
PIN1
Connect to the motherboard
Note: To optimize compatibility and performance, please connect your hard disk
drive to the primary IDE connector (IDE1, blue) and CD-ROM to the
secondary IDE connector (IDE2, black).
USB header
(9-pin USB45)
(see p.6 item 13)
Infrared module connector
(5-pin IR1)
(see p.6 item 14)
Internal audio connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.6 item 24)
(AUX1: see p.6 item 23)
Audio1 connector
(9-pin AUDIO1)
(see p.6 item 20)
Secondary IDE connector (Black)
(39-pin IDE2)
(see p.6 item 8)
PIN1
Blue
80-Pin ATA 100/133 cable
USB_PWR
P-5
P+5
GND
DUMMY
1
GND
P+4
P-4
USB_PWR
IRTX
+5V
DUMMY
1
GND
IRRX
CD-L
GND
CD1
GND
CD-R
AUX-L
GND
AUX1
GND
AUX-R
GND
+5VA
BACKOUT-R
BACKOUT-L
1
AUD-OUT-L
DUMMY
AUD-OUT-R
MIC-POWER
MIC
IDE2
Black
Connect to the IDE devices
TM
ASRock I/O already
provided 4 default USB ports.
If the 4 USB ports on the rear
panel are not sufficient, an
USB header is available for 2
additional USB ports.
This connector supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
1 2 1 2 1 2
1 2 1 2