Table of Contents
Advertisement
TWRWR
This option appears only when you adopt AM2 CPU. Use this to adjust TWRWR
values. Configuration options: [Auto], [1CLK], [2CLK] and [3CLK]. The default
value is [Auto].
TRDRD
This option appears only when you adopt AM2 CPU. Use this to adjust TRWTTD
values. Configuration options: [Auto], [2CLK], [3CLK], [4CLK] and [5CLK].
The default value is [Auto].
MA Timing
Use this to adjust values for MA timing. Configuration options: [Auto], [2T],
[1T]. The default value is [Auto].
Addr/Cmd Fine Delay
Use this to adjust values for Addr/Cmd Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
CS/ODT Fine Delay
Use this to adjust values for CS/ODT Fine Delay feature. Configuration options:
[Auto], [No Delay], [1/64CLK] to [31/64CLK]. The default value is [Auto].
Bank Interleaving
Interleaving allows memory accesses to be spread out over banks on the same
node, or accross nodes, decreasing access contention.
3 . 3 . 2
3 . 3 . 2
Chipset Configuration
Chipset Configuration
3 . 3 . 2
3 . 3 . 2 Chipset Configuration
3 . 3 . 2
Chipset Configuration
Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Settings
Onboard LAN
Onboard HD Audio
Front Panel
Hybrid SLI
Primary
Graphics Adapter
CPU - NB Link Speed
CPU - NB Link Width
DRAM Voltage
Chipset Core Voltage
HT Voltage
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
Onboard HD Audio
Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If you
select [Auto], the onboard HD Audio will be disabled when PCI Sound Card is
plugged.
To set DRAM Voltage.
[Enabled]
[Auto]
[Auto]
[Disabled]
[PCI]
[Auto]
[Auto]
Select Screen
[Auto]
Select Item
[Auto]
+ -
Change Option
[Auto]
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
4 7
4 7
4 7
4 7
4 7
Advertisement
Table of Contents
