ASROCK K10N78HSLI-GLAN Installation Manual page 16

Enjoy the benefit of NVIDIA Enjoy the benefit of NVIDIA Enjoy the benefit of NVIDIA
Enjoy the benefit of NVIDIA Enjoy the benefit of NVIDIA
TM
To enjoy Hybrid SLI
Step 1. Install one compatible PCI Express graphics card to PCIE1 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2. Connect the monitor cable to the correspondent connector on the PCI
Express graphics card on PCIE1 slot.
Step 3. Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced" screen,
and enter "Chipset Settings". Then set the option "Hybrid SLI" to [Auto] or
[Chipset Default].
Step 4. Boot into OS. Install Hybrid SLI
TM
Hybrid SLI
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\nVIDIA\Vista(174.91) (For Windows
OS)
..\Drivers\Hybrid SLI driver\nVIDIA\Vista64(174.91) (For Windows
TM
Vista 64-bit OS)
Step 5. Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar.
Step 6. The default setting is GeForce
need to adjust the setup anymore.
NOTE
If you click the Hybrid icon on the Windows
required Hybrid SLI
GeForce ® Boost mode (Boost Performance), please do not select the options
("Save Power" and "Additional Displays") other than "Boost Performance".
1 6 1 6 1 6
1 6 1 6
ASRock
Hybrid SLI Hybrid SLI Hybrid SLI
Hybrid SLI Hybrid SLI
® ® ® ® ®
feature, please refer to below installation and setup procedures.
TM
driver from our support CD to your system.
driver is in the following path of ASRock support CD:
® Vista TM / Vista
®
Boost mode (Boost Performance). You do not
® task bar, you are allowed to select your
TM mode. However, since this motherboard only support
K10N78hSLI-GLAN
TM TM TM TM TM
TM 64-bit.)
®
Vista
Motherboard
TM
®
®