Advertisement
Available languages
Available languages
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
F F F F Functions
unctions
unctions
unctions
unctions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Make a SATA / SATAII driver diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please choose:
1. Generate AHCI Driver diskette for WindowsXP
2. Generate RAID Driver diskette for WindowsXP
3. Generate AHCI Driver diskette for WindowsXP64
4. Generate RAID Driver diskette for WindowsXP64
5. Exit
Reboot system now
Press any key to continue
Please insert a floppy diskette into the floppy drive. Select your required
item on the list according to the mode you choose and the OS you install.
Then press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 3: Set Up BIOS.
Please follow step 1 to set up the BIOS option "SATA Operation Mode" to [AHCI].
STEP 4: Install Windows
®
You can start to install Windows
®
Windows
setup, press F6 to install a third-party AHCI driver. When prompted, insert the
SATA / SATAII driver diskette containing the NVIDIA
disk, the drivers will be presented. Select the driver to install according to the OS you
install. The drivers are as below:
ASRock
K10N78hSLI-WiFi / K10N78hSLI-1394
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
®
®
®
XP / Windows
XP 64-bit on your SATA / SATAII HDDs
Advanced screen
®
XP / XP 64-bit.)
XP / XP 64-bit OS on your system.
®
XP / XP 64-bit on your system. At the beginning of
®
AHCI driver. After reading the floppy
IDE Configuration.
2 9
2 9
2 9
2 9
2 9
Motherboard
Advertisement
