Related Manuals for CyberPower UP625
Summary of Contents for CyberPower UP625
- Page 1 User’s Manual for: UP625 UPS UP825 UPS ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT: www.cyberpowersystems.com/FAQs.htm...
-
Page 2: Table Of Contents
DEFINITION FOR ILLUMINATED LED INDICATORS……………………………….…..…8 LIMITED WARRANTY AND POWER CONTROL GUARANTEE…………………….……8 Thank you for purchasing a CyberPower Systems Product. To enjoy all the features and benefits of this Uninterruptible Power System (UPS), please read and follow all installation and operation instructions completely. This UPS is designed to provide... -
Page 3: Important Safety Warnings
CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! CyberPower Systems does not sell products for life support or medical applications. DO NOT use in any circumstance that would affect operation or safety of any life support equipment, with any medical applications, or patient care. -
Page 4: Installing Your Ups System
INSTALLING YOUR UPS SYSTEM UNPACKING Inspect the UPS upon receipt. The box should contain the following: (1) UPS Unit; (1) PowerPanel Plus Software Disk; (1) Serial Interface Cable (DB-9); (1) Telephone Cable; (1) User’s Manual; (1) Warranty Registration Card HARDWARE INSTALLATION GUIDE 1. - Page 5 PowerPanel Plus™ software. This interface is also compatible with the UPS service provided by Windows NT, Windows 2000 and Windows XP. ◆ Network Protection Ports (RJ45/RJ11) These ports protect standard network cables and telephone cables. UP625/ UP825 Guaranteed Uninterruptible Power System When...
-
Page 6: Battery Replacement And Storage
BATTERY REPLACEMENT AND STORAGE Contact your dealer or call the number in this manual for information on battery replacement. The order numbers for the battery are as follows: BA-UP625 for UP625 BA-UP825 for UP825 CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servicing the battery. - Page 7 Recharge the battery every three months to insure battery life. If the battery remains uncharged for an extended period of time, it may suffer permanent loss of capacity. UP625/ UP825 Guaranteed Uninterruptible Power System...
-
Page 8: Troubleshooting
Unit has been damaged by a surge or spike. Solution Recharge the battery by leaving the UPS plugged in. Contact CyberPower Systems at tech@cyberpowersystems.com Turn the UPS off. Wait 10 seconds and then turn the UPS on. The unit must be connected to a 110/120v 60Hz outlet. -
Page 9: Technical Specifications
Power On, Using Battery, Wiring Fault Audible Alarms Communication Power Panel Plus Software Management Self-Test Auto-Charger Auto-Restart UP625/ UP825 Guaranteed Uninterruptible Power System UP825 825VA 450W 100Vac – 140Vac 57 – 63 Hz 60 Hz +/- 1% RJ11/RJ45 (One In/One Out) 28.3cm*9.1cm*16.4cm... -
Page 10: Definition For Illuminated Led Indicators
None LIMITED WARRANTY AND POWER CONTROL GUARANTEE In purchasing UP625/ UP825 in the United States or Canada, the original end user receives a Limited Warranty and CyberPower's Power Control Guarantee from CyberPower Systems (USA), Inc. (for ease of reading, referred to as "CyberPower"). The Limited Warranty and the Power Control Guarantee are intended to be the initial end-user's exclusive rights and remedies. - Page 11 4. Pack and ship the Product to CyberPower as instructed in your RMA. Show the RMA code on the shipping label or include it with the Product. You MUST prepay all shipping costs and you are responsible for packaging and shipment. UP625/ UP825 Guaranteed Uninterruptible Power System...
- Page 12 CyberPower will inspect and examine the Product within ten (10) days of receipt. If the Product is not as warranted, CyberPower will repair or replace the Product and return it to you at CyberPower's expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required).
- Page 13 Equipment or damage to such equipment so that CyberPower’s maximum liability shall be reduced to reflect all such other payments or sources of recovery: CyberPower UP625 -$50,000.00 / UP825 -$75,000.00 4. If CyberPower replaces the connected equipment or pays to the Initial Customer the Agreed Damage Amount, the Initial Customer shall transfer all item(s) to CyberPower without warranty by the Initial Customer, but free of lien or other interest.
- Page 14 Any Implied Warranty of Merchantability or for Fitness for a Particular Purpose, if applicable to the Product, is limited in duration to the period of ownership by the Initial Customer. This provision shall NOT create any Implied Warranty or Merchantability or of Fitness for a Particular Purpose that would not otherwise apply to the Product.
- Page 15 United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. Contact Information: The address for CyberPower Systems (USA), Inc. is 5555 12th Ave East, Suite 110, Shakopee, MN 55379 and its phone number is (952) 403-9500.