Table of Contents
Advertisement
For Windows
Click "Audio I/O", select "Connector Settings"
"Disable front panel jack detection", and save the change by
clicking "OK".
For Windows
Click the right-top "Folder" icon
panel jack detection", and save the change by clicking "OK".
System Panel Header
(9-pin PANEL1)
(see p.12, No. 21)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.12, No. 23)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.12, No. 24)
CPU Fan Connector
FAN_SPEED_CONTROL
(4-pin CPU_FAN1)
(see p.12, No. 4)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.12, No. 2)
XP / XP 64-bit OS:
®
Vista
/ Vista
64-bit OS:
®
TM
TM
This header accommodates
PLED+
PLED-
several system front panel
PWRBTN#
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
match the black wire to the
+12V
CHA_FAN_SPEED
ground pin.
Please connect the CPU fan
4
cable to this connector and
CPU_FAN_SPEED
3
+12V
match the black wire to the
2
GND
1
ground pin.
Pin 1-3 Connected
3-Pin Fan Installation
1
Please connect an ATX power
13
supply to this connector.
12
24
2 9
2 9
2 9
2 9
2 9
, choose
, choose "Disable front
Advertisement
Table of Contents
