Driver Installation Guide; Installing Windows; 64-Bit / Vista; Tm Tm - ASROCK H61M-U3S3 User Manual

2.16 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.17

Installing Windows

/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.17.1 Installing Windows

Functions

If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE] for SATA2 ports.
Set the option "SATA3 Mode" to [IDE] for SATA3 ports.
®
STEP 2: Install Windows

7 / 7 64-bit / Vista

®
® TM
7 / 7 64-bit / Vista / Vista

XP / XP 64-bit Without RAID

®
® XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
XP / XP 64-bit OS on your system.
33
TM TM
/ Vista 64-bit / XP
TM
64-bit / XP / XP 64-
® XP / XP 64-bit OS.
SATA Con guration.